How a U-Pack Trailer Move Actually Works: Pay by the Foot, Load It Yourself
The short answer: U-Pack drops a 28-foot trailer at your home, you get three business days to load it, you install a locking divider wall (called a bulkhead) across the trailer when you're done, and the driver measures how many linear feet you used. You pay only for those feet — there is a five-foot minimum — and the rest of the trailer is filled with commercial freight heading the same direction. At your new home you get three business days to unload. No deposit is due, and you pay nothing until your belongings are in transit.
The trailer, in one paragraph
The standard U-Pack trailer is 28 feet long, 8 feet wide, and 9 feet tall on the outside, holding up to 1,944 cubic feet — roughly a 26-foot rental truck plus a 10-foot truck combined. It sits about 48 inches off the ground, so a ramp (provided free) is how everything goes in. One caution: U-Pack's fleet also includes 13-foot, 17-foot, and 35-foot trailers, so confirm the size on your quote rather than assuming 28 feet.
Step by step
1. Drop-off. U-Pack delivers the trailer to your street or driveway on the date you pick. You need about 40 feet of length, 10 feet of width, and 14 feet of overhead clearance, plus legal, approved parking. Someone must be there to sign for it.
2. Load front to back. Load from the front wall (the "nose") toward the back, heavy items first, floor to ceiling. Every foot you save is money off your bill, so use the full width and height: mattresses against the front wall, lighter boxes stacked on furniture, gaps filled as you go.
3. Install the bulkhead. When everything is in, fit the bulkhead panels across the trailer and lock them. The bulkhead separates your shipment from whatever else rides in the trailer — but it is not built to hold the weight of your load, so tie items down with ropes or straps as you load.
4. Stow the ramp on the far side. After the bulkhead is locked, the ramp goes into the trailer in the empty space beyond the bulkhead — never behind it with your belongings. You need that same ramp at the destination to unload, and behind a locked bulkhead you cannot reach it.
5. The driver measures, and that number is your bill. The driver measures the actual linear footage your load occupies and writes it on the Bill of Lading. That measurement — not your quote estimate — sets your final price: use less space than quoted and the price comes down; use more and it goes up. Read the number before you sign. Correcting a footage figure on the spot is far easier than disputing a bill after delivery — and photograph your load before the bulkhead goes in: one mover caught an overcharge exactly this way, and U-Pack corrected it from the driver's photos and refunded the difference.
6. Transit and unload. U-Pack drives the trailer to your new address; average transit runs 4–6 days within the continental U.S. At delivery you get three business days to unload, then you call U-Pack and they take the trailer away.
What most guides skip: your load rides at the nose, freight rides behind
Here is the part of the process that rarely makes it into reviews. Your household goods are always loaded at the nose of the trailer, and the commercial freight that fills the rest of the space is loaded later, at the terminal, behind your locked bulkhead. Two U-Pack household moves are never mixed on the same trailer — yours is the only household shipment in it. That is why the bulkhead matters so much: it is the only thing standing between your sofa and a load of commercial freight that was never in your living room.
Air bills: the footage runs to the bulkhead, not to your last box
Because the driver measures from the nose to the bulkhead, any empty stretch between your last box and the divider still counts as footage you pay for. A two-foot gap you left "just in case" is two feet on the bill. The fix is to build a tight, even wall at the back of your load and put the bulkhead right against it — the same discipline as packing a container tight, except here the slack shows up as a line item instead of just wasted space. Walk the trailer with a tape measure as you load: your quote lists the price for each footage tier, so you can watch the number move in real time and decide whether that last armchair is worth another foot.
The text that ends loading day
Once you tell U-Pack you are finished loading, pickup is typically set for the next business day — and movers report the confirmation arriving by text. In a 2018 cross-country trailer move, the pickup confirmation came as a text message the day after loading finished, with the driver arriving the following day. Before that text, check three things: the bulkhead is locked, the ramp is stowed on the far side of it, and nothing you still need is sitting behind the divider. Once the driver takes the trailer, you cannot get back in.
The bulkhead is plywood, the ramp is heavy, and you supply the lock
One more thing the glossy guides leave out: the bulkhead is not a neat factory door. Movers describe it as slabs of plywood with metal poles that have to be muscled into the trailer's fittings — and the wooden barriers are, in one 2026 reviewer's words, impossible to put up and take down by yourself. Plan on two people for this job, not one. The ramp is the same story: very heavy, and not a one-person lift. And U-Pack does not provide the padlock for the bulkhead — you buy it yourself (U-Pack recommends two locks, with links), so have them in hand before loading day rather than discovering the requirement at the end of it. One more measuring quirk: the trailer's printed foot lines do not always line up with the E-track slots, so the bulkhead can end up sitting on a half-foot line — one more reason to photograph the finished load and check the driver's footage number.
FAQ
Do I have to be there when the trailer is picked up?
No — but the bulkhead must be locked and the trailer accessible.
What happens to the space I don't use?
It is filled with commercial freight moving in the same direction. You are not charged for it.
Can I use the whole trailer?
Yes. If you fill all 28 feet, your rate adjusts to the full footage — just leave room for the ramp so it travels with the trailer for unloading day.
Updated: October 26, 2026. If you are still deciding between container companies, run your numbers through the moving cost calculator first — a trailer quote only makes sense next to a container quote for the same route. The same tie-down discipline in how to load a PODS container applies here, and advertised dimensions are exterior: PODS container interior dimensions shows how much smaller the inside really is.